CCIE Mentoring

Submitted by RamySisy on Tue, 07/29/2008 - 12:34.

Feel free to join our group if you are really keen to get certified in any of the current CCIE Tracks.
Good Luck for all
Ramy Sisy

CCIE PREP STAGES STEPS

Submitted by Seyi on Thu, 09/22/2011 - 06:44.

Hmm,, Just passed the TSHOOT exam recently and looking forward to the CCIE(R&S) Lab

Gotta cover up the knowledge gap between the NP and the IE, even more so after cisco removed some important topics from the NP curriculum

Planning to start with ATC from the INE and study technologies individually

Techs to study are

1) BGP
2) MPLS VPN
3) QOS
4) SECURITY
5) IPV6
6) NTP
7) NETWORK SERVICES

i hope that by the time iam done studying these technologies, i will be at least on the knowledge base for the CCIE and the real prep can start from there  ...  read more »

Studying Incorrectly for CCIE Lab?

Submitted by NetBrain on Mon, 08/01/2011 - 16:43.

Everyone knows the CCIE Lab is one of the most difficult exams. And it doesn't exactly help that the study methods used aren't the most efficient. Unfortunately, there is a lot of wasting time when it comes to studying for labs. NetBrain has a great solution to improve your learning ability.  ...  read more »

PPP over AToM

Submitted by faraz_ts on Thu, 09/09/2010 - 16:39.

Hello

i am hoping someone can actually help me with this. I have my lab setup and i have configured PPP over AToM. Now, the VC comes up in the MPLS cloud but for some strange reason, i cant ping from Site A to Site B.

If i do debug ip icmp on either site, i can actually see ping traffic hitting the router but the receiving router sends a 'host unreachable sent to destination' when it receives the ping. I have not configured any access-list or any command on the interface that may possibly block the communication between the VPN sites over AToM.  ...  read more »

Spanning tree protocol

Submitted by udhay on Tue, 05/05/2009 - 19:11.

Hi all,

When a designated port receives a INFERIOR config BPDU, it will send it conf BPDU in that port. What will happen if a designated port receives a SUPERIOR BPDU ???

Joined CCNA with www.rstforum.com

Submitted by neeteen on Sat, 05/02/2009 - 10:50.

Finaly I joined above institute and started CCNA study. I will not be giving CCNA Exam. Might go for CCNP exam and then will try for CCIE. Lets see how it works for me. Things might change as i progress through the path.
regards
Nitin

Finnished IPv6

Submitted by VictorOsborn on Wed, 08/06/2008 - 07:21.

Had a week just studing IPv6. Think I have grip on general IPv6, tunneling, redistribution and IPv6 routing now. I have booked mocklab 2 and start 6 AM saturday morning. Will study multicast until then.

Finnished Mock lab 1

Submitted by VictorOsborn on Tue, 08/05/2008 - 08:43.

I finnished mock lab 1. I got a score of 89. I got reachability after 3 hours and had plenty of time to verify. I missed to verify on ipv6 address of one the interfaces and lost 2 points. I lost another 3 points because wrong routing because of the first mistake, wrong ipv6 address. I missed 2 points of a simple frame-relay task. I missed it because I did a pppoFr solution and the proctor said that was changing the encapsulation of the interface. I don`t aggree because its still encapsulation frame-relay on the main interfaces, I just running ppp over it.  ...  read more »

Finnished Lab 11

Submitted by VictorOsborn on Mon, 08/04/2008 - 08:48.

Well my plan is to go deep into ipv6, reading from doccd, lab on dynamips and go through Netmaster class in ipv6. Next weekend I will to start on lab 1 again to gain speed and precision and recap some of the features that is not core.