securitygirl's blog

Problem with Route-MAPS

Submitted by securitygirl on Sat, 08/01/2009 - 01:43.

I feel pretty stupid right now. Been doing a lab in which I create a route-map to reroute data to a lower bw link....not working. I have debugged and done everything I know how. Will re-read my notes and take a break. I would like to take the BCSI exam in the next week. Am almost done with ONT class...on wireless. Then I am trying to decide which CCIE exam to do. Security or Routing and Switching?

Who freaking knows.

Designated Router Elections....

Submitted by securitygirl on Sun, 04/19/2009 - 01:20.

#.net file is as follows:
# Will use no serial devices in this lab since DRs are not elected on pt-pt links.
# DR Router Eletios

[localhost]

[[2611XM]]
image = /opt/images/c2600-adventerprisek9-mz.124-15.T7.image
ram = 128
workingdir = /home/Pamela/dynaworks
nvram = 128

[[ROUTER R1]]
model = 2611XM
console = 2011
fa0/0 = lan 1
idlepc = 0x81501914

[[router R2]]
model = 2611XM
console = 2012
fa0/0 = lan 1
idlepc = 0x82af8e08

[[ROUTER R3]]  ...  read more »

OSPF Bad LSA problem solved...

Submitted by securitygirl on Sun, 04/19/2009 - 00:23.

I moved to the 12.4(15) advanced enterprise image and all is well. Also, didn't realize that 12(3) did not support adding interfaces to OSPF areas.

Duh!!!!!

On my way to CCIE Security!
Securitygirl

Problem with OSPF in dynamips.....

Submitted by securitygirl on Sat, 04/18/2009 - 23:39.

Am having problems with a simple 3 lab in which 2 routers are connected via fast-ethernet, and the serial of the 2nd router is connected to the serial 0/0 of the third. I keep getting
OSPF-4-BADLSATYPE messages.....

Not sure if I have a dynagen error. I am running 12.2(3) on 2611XM's am going to try to connect each of the fa0/0's to lan 1 to see if this helps. I have also set the network type as broadcast on those links.

I'm a CCSP and taking the written exam in a month. I'm reviewing all of my routing for the exam.

Securitygirl